How to Buy a Car Battery

Cars are an expensive investment and many of us will rely on our vehicle to last us and our transporting needs for a considerable number of years. Cars are built to last but in order to ensure that they maintain smooth running , we need to do a fair bit of maintenance along the way. There is a list of maintenance activities we should be familiar with to pass our driving tests and in general to make sure we don’t get hit with a hefty repair bill if the car gets run down over time.

One of the key checks to make regularly is the oil for your car’s engine. Oil is essential to ensure the engine is properly lubricated and operating smoothly. The engine of car with low levels of oil can be louder or make a rattling or a grating noise. It is important that you don’t allow your car’s engine to get to this point as it can mean a costly replacement will be needed.

Firstly you should be aware of how to check your oil levels; this is done by using a dip stick that can be found in the engine bay.

Remove the stick and wipe away all trace of oil from the markers to ensure you get a true reading that is correct. Then replace the dipstick fully and take it out again, you should have the oil level somewhere between the maximum and minimum levels, if not then you need to top up your oil immediately.

Knowing what type of motor oil your vehicle requires is vital to ensuring it operate properly. You can check your vehicle handbook for this requirement or many commercial oil companies will be able to tell you by entering your registration plate online.

Once you have bought the correct oil for your car you need to remove the oil filler cap and pour the oil in, you may need a funnel to stop the oil spilling.

If the oil does spill clean it up with kitchen roll or a rag to keep the engine bay clean. Pour the oil a little bit at a time, making sure to check the oil level regularly. With some cars it can take some time for the oil to settle in the system so you may need to come back later to check the levels again. It is a good idea to ensure that the car is parked on a flat to ensure the reading is not obscured.

Once you’ve topped up your oil your engine should be a bit quieter and run more efficiently. It makes sense to have the engine drained and change the oil every year or as a part of any servicing you get done on the car.

Make sure when buying any used car that you check the oil as soon as possible. Get used car finance on cars to help ease the cost of buying a car, car finance can help you afford a better and safer car.

Find More Car Engine Articles

Article by Wilford Hobbs

Discover How To Obtain Free GasolineSave Dollars On Fuel And Other ThingsI have been engaged in a little bit of research on the different methods to save dollars and have found numerous good ideas amongst the ones that are not so valuable.Suggestions that are not so good are those that are unrealistic (“pay off your credit cards now and save interest” which you would (have done|do} if you were able to), lame (coupons and rebates and corny nonsense such as that) and too much of a sacrifice (take public transportation, etc)So, here are a few helpful ideas…1. AVOID BRAND NAMES – Do you truly need Betty Crocker cooking oil when you can purchase the exact same thing less expensively made by Albertson’s? Multiply that across peanut butter, toilet paper (Target has the best!), other paper products like paper towels, breakfast cereal and you are looking at significant savings with no sacrifice!2. LEAVE THE CREDIT CARDS HOME WHEN YOU GO TO THE BAR! – Drink less, be less of “Mr Big Spender”, less hangover in the morning!3. USE VOIP – What’s VOIP? Voice Over Internet Protocol. If you use SKYPE for instance, it costs essentially nothing and you can save the expense of a traditional phone line. If you connect to the internet using Cable TV then you won’t have a need for a phone line at all.4. GET PAID BY DIRECT DEPOSIT/ACH – Why does this save money? Have you ever deposited a check and not taken a bit of cash out? If you use direct deposit then you won’t have that temptation!5. PAY YOURSELF FIRST – This is more a savings plan then a way to save on items you are buying but it is all about more money for you, right? Take 10% of each paycheck off the top and deposit into another savings account that you don’t touch. And FORGET it is there. You will find that you live just as well without it and actually build up some savings. Some ways to do this… if you got a raise drop that extra cash into that account. If you paid off a debt continue to pay it but to yourself. Think of some ideas of your own.6. SAVE ON AIR CONDITIONING/HEATING – Run the thermostat at the lowest energy use (like at 50 degrees in the Winter) during the night and have a room heater. I have a small room heater that I purchased at the Sears for $ 24. That thing cranks. I hardly have to have it above the lowest level and it is adequate to heat the room.7. OPTIMIZE YOUR GASOLINE CONSUMPTION – Properly using water in your fuel system can save you up to 30% off gasoline costs for your car by making the gasoline you buy perform better. If you pay $ 40/week for gas you might just save $ 600 or more per year!Discover Best Fuel Saver Save Gas Using Water Today

Article by Kelly Reese

How To Spend Less On FuelTimes have changed and it is sometimes difficult to keep up. In the past, one bought a car and hoped for the best and there wasn’t a whole lot that could be done to increase your gas performance. Once the vehicle has been converted to run on water, you can be certain that you are benefiting the environment while you are paying a fraction of your previous fuel bills. Water is released through the exhaust system; no more nasty carbon monoxide emissions, just pure water. There are testimonials that the combustion system will also remove pollution from the air intake. It doesn’t get much greener than that. So what is water electrolysis and how does it actually work? Electrolysis of water is simply the splitting of water into hydrogen and oxygen through the passing of a small electrical current through the water. It really is as straightforward as that, although different methods have different efficiency levels. It is not even necessary to introduce an electrolyte like acid to the water to assist electrical conductivity. Normal water from the tap is all that’s needed.H20 For FuelUntil recently, the problem with a water electrolysis system was that the electrical energy required to perform the electrolysis exceeded the energy produced from the combustion of the oxygen and hydrogen. In other words, while it may have been a cleaner way of running a vehicle, it was thoroughly inefficient and wasteful of valuable energy. This has been solved Hydrogen fuel powered vehicles are by their nature safer than using gasoline. A hydrogen fuel conversion system is extremely versatile, requiring no alterations to a vehicle’s existing gasoline powered system. Indeed, it is possible to switch back to the gas system any time a consumer may wish without any hassle. Most people are installing a hybrid system which continues to use gasoline but much more efficiently while greatly reducing toxic emissionsWhat this does is make smaller particles out of the ones that the engine uses as fuel. Because of the smaller size the system is able to use a lot more of it.By doing this you can minimumly expect to increase your gas performance by thirty to fifty percent or even more. It also helps make emissions significantly cleaner.Discover How To Spend Less On FuelToday

More Car Engine Articles

Transportation is very important for human life since nowadays people have high mobility. They need to be in another place in an hour from a faraway place. Therefore, they need transportation that can transport them whenever they go as soon as possible. It is true that the government have provided them with public transportation. However, the public services often cannot accommodate their needs. As a result, some people prefer to drive their own cars to move from one to another place. They do not have to wait the public transportation arrive and in certain place, they move to another public transportation.
Since private vehicles offer people ease to go wherever and whenever they should, cars often become choice of private vehicles. So far, everybody know that cars manufactured in Japan are outstanding in the counter even the popularity of Japanese cars beats that of European cars. However, Korean cars, recently receive the attention of customers in the world. One of Korean car that becomes the attention is Hyundai ix35. It is said that the car has bold outlook, even though it is not intended for off-road activities. Still, the car looks cool on the road though some people admit that the exterior and interior is exaggerated.
The same as Japanese manufacturers which emphasis on the performance of their cars, this Korean car also give great attention on the performance of the car. Thus, it is not surprising that the performance of the car is as good as that of Japanese cars. This Hyundai car which provides plenty space is dynamic and practical so the driver get the comfort of driving the car. More information about the strengths and the weakness of this Korean car can be found in Hyundai ix35 review. Do the strengths of the car cover the weakness of the car itself? Will it beat Japanese cars whose quality has been proven for decades?

INDIA IS being recognised as emerging auto market in the current years and is the fifth largest commercial vehicle manufacturer in the world. India is the fourth largest car market in Asia after Japan, South Korea and Thailand, has recently crossed the 1 million mark.

India is also a huge market in small car segment as it covers about 80% of market share in the Indian car market. In 2010 many international car makers including Toyota Motors, Nissan Motors, Chevrolet, Volkswagen, etc. launched small cars and mid size cars for the Indian roads.

Etios: Japanese car maker Toyota Motors launched the entry-level sedan Etios. The Etios is powered by a newly developed 1.5 liter 16 valve DOHC engine that produces 90 hp and has a torque of 132 Nm.

New Skoda Fabia: The new Skoda Fabia comes with 1.6 MPI, 1.2 TDI CR and 1.2 MPI engine. The car has Dual Front Airbags, ABS (Antilock Brake Syatem), EBC, height and reach adjustable steering wheel.

Nissan Micra: Nissan Motor Company launched Nissan Micra features a 1.2L three-cylinder petrol engine that delivers maximum power of 76 bhp @ 6000 rpm and 104Nm torque @ 4000 rpm.

Chevrolet Beat: World largest auto manufacturer, General Motors’ Chevrolet Beat is powered by a 1.2 liter 4 cylinder engine which would produce 70 bhp, 5-speed manual gearbox.

Volkswagen Polo: Volkswagen (VW) launched Volkswagen Polo equipped with a 1.2 litre engine which produces an output of 74 bhp @ 5400 rpm and a Torque of 110NM @ 3750 rpm.

Hyundai Verna Transform: Hyndai Motors’ Hyundai Verna Transform has 1599cc VTVT, 5 Speed Manual transmission, Max Power: 103.2 ps @ 5500 rpm, Max Torque: 14.9 kgm @ 3000 rpm.

Ford Figo: Ford has launched the Ford Figo in India, powered by 1.2 Duratec engines, with SEFI technology, 70 bhp at 6,250 rpm and a torque of 102 Nm at 4000 rpm.

Indica V2 Turbomax: Tata Motors launched this car and the Tata Indica V2 Turbomax has new 71 PS BS4 turbo diesel engine, maximum torque of 135 Nm @2500rpm, ARAI certified mileage of 19 kmpl.

New Wagon R: Top selling car from Maruti Udyog Ltd., WagonR come with a major re-haul and an all-new attitude. The car features a 1.1L In-line 4 engine capable of producing 64 bhp and 84 Nm of torque.

Alto K10: Maruti Udyog Ltd.’s new Alto K10 is loaded with a 1.0L, 998cc, 3-Cylinders, 12-Valve KB10 petrol engine and a maximum torque of 90Nm at 3500 rpm.

Read here for more information related to Business News in India and Business News India.

Related Car Engine Articles

So your mechanic says you need a new engine. You think, “what does he mean a new engine? Why wouldn’t I just buy a new car?”

The answer is, because it is more economical to replace the engine than the entire car. A new engine means just a part of what is under the hood. It does not include the transmission, the steering components, the brake mechanisms, the exhaust setup, etc. These are all different systems that run in addition to the engine itself. Replacing just the engine is much less expensive than a new or used car altogether.

Next, you should be thinking about where this new engine should come from. Buying a new engine from a dealer or manufacturer is not really recommended by anyone but the dealers and manufacturers. The reality is that the other parts on the vehicle already have as many miles as the original engine. A new engine with no miles will likely far outlast the rest of the vehicle, and is therefore an unnecessary expense. Its similar to buying a new house instead of repairing the bathroom plumbing that is leaking.
Search instead for a used engine. This will cost far less than a new one, and will run just as well.

One thing to keep in mind, though, is the mileage on the engine you purchase. A used engine will be just that – used for a certain number of miles before being removed from the original vehicle. Sometimes they come from cars that were damaged beyond reasonable repair in an accident. Others come from older vehicles that had new engines installed, and therefore will have pretty low miles. A CARFAX should be obtained before purchasing any new engine. This ensures the accuracy of the mileage, as well as a more reasonable view of the expected life of said engine.

When it comes to the cost of labor, though, there are not many ways to catch a break. Consumers must adhere to the rules of the Gods of the Garages, and have little room to sway from the rates quoted for the work it will require to fix the vehicle. The only help possible is to compare the hourly labor rates for a few different garages, and try to get the vehicle repaired at the best price. If you don’t have time to wait and shop around, you may pretty much have to take whatever it is they hand you in terms of price. Don’t hesitate to barter some though, and be sure they are not billing for time they do not actually use on your vehicle. Ask to have each line on the bill explained, and get a reasonable description of how the work took that long. If you at least ask, sometimes they can find small pockets of time that can be taken off your bill once they take a closer look. As long as you speak respectfully and without emotion, you are likely to be treated in a similar fashion, and the garage will want to help you out with the process. If you ask in an accusing manner, you will get a short explanation, and no closer look. Manners pay off in the bartering world of car repair.

Just remember to be the most informed consumer possible. You can’t know everything about everything, so focus instead on learning the most from each experience and repair with your vehicle.

Engine Fundamentals

Atoms are the building blocks of the world. Any substance that is made up of only one kind of atom is called an element. Atoms of different elements can connect up with each other. This process is called a chemical reaction. The burning of fuel in an automobile engine is a chemical reaction. We normally refer to this chemical reaction as combustion. Automobile fuels are made up mostly of two elements hydrogen and carbon. These are therefore called hydrocarbons. During complete combustion in the engine, these two elements unite with a third element, the gas oxygen. Each oxygen atom connects up with two hydrogen atoms to form water. Each carbon atom connects up with two oxygen atoms to produce the gas carbon dioxide.

During combustion of gasoline in the engine, the burning gases get very hot. Their temperatures may go as high as 3319OC. This high temperature produces the pressure that makes the engine run and produce power.

With ideal, or perfect, combustion, all of the hydrogen and all of the carbon in the gasoline would combine with oxygen to form harmless water and carbon dioxide. However in the engine we do not get ideal combustion. Instead some of the gasoline does not burn. Also some only partly burns producing carbon monoxide. The unburned gasoline and partly burned gasoline cause pollution of the air as they exit through the tail pipe with the exhaust gases. This is the reason that cars are equipped with anti pollution devices called emission controls. These devices reduce the amount of pollutants coming from the engine.

The concepts involved are expansion of solids with heat. Any solid like the metal in an engine piston, expands and gets larger as its temperature increases. However the piston must be free to move up and down in the cylinder, even if it gets very hot. The piston is designed so that it does not expand too much. If it did it would stick in the cylinder and the engine would be damaged.

Fluids also expand with heat. The rules are pressure increases with increasing temperature. The rule works the other way too. The second rule is temperature increases with increasing pressure. Both rules are at work in the engine cylinders. First a mixture of air and gasoline vapor is taken into the cylinder. Then the piston moves up to compress this mixture. Compressing the mixture – increasing the pressure on the mixture – makes it hot. Next, the compressed mixture is ignited, or set on fire. It burns producing a very high temperature. The high temperature causes high pressure. The high pressure pushes the piston down. This motion is carried to the car wheels so that they turn and the car moves.

Other concepts involved are the thermometer, the thermostat, gravity, atmospheric pressure, vacuum and humidity. The atmospheric factors affecting combustion in the engine are changes in temperature, atmospheric pressure, and humidity. They affect the way the fuel burns and the power output of the engine. Accurate testing of the engines requires that all readings be corrected to account for temperature, atmospheric pressure and humidity.

Internal Combustion Engines

Automotive engines are called internal combustion (IC) engines because the fuel that runs them is burned internally, or inside the engines. There are two types, reciprocating and rotary. By reciprocating we mean moving up and down or, back and forth. Almost all automotive engines are the reciprocating type. In these engines pistons move up and down, or reciprocate in cylinders. This type of engine is called a piston engine.

In this way scientific and engineering principles help us understand how engines work.

Cars are an expensive investment and many of us will rely on our vehicle to last us and our transporting needs for a considerable number of years. Cars are built to last but in order to ensure that they maintain smooth running , we need to do a fair bit of maintenance along the way. There is a list of maintenance activities we should be familiar with to pass our driving tests and in general to make sure we don’t get hit with a hefty repair bill if the car gets run down over time.

One of the key checks to make regularly is the oil for your car’s engine. Oil is essential to ensure the engine is properly lubricated and operating smoothly. The engine of car with low levels of oil can be louder or make a rattling or a grating noise. It is important that you don’t allow your car’s engine to get to this point as it can mean a costly replacement will be needed.

Firstly you should be aware of how to check your oil levels; this is done by using a dip stick that can be found in the engine bay. Remove the stick and wipe away all trace of oil from the markers to ensure you get a true reading that is correct. Then replace the dipstick fully and take it out again, you should have the oil level somewhere between the maximum and minimum levels, if not then you need to top up your oil immediately.

Knowing what type of motor oil your vehicle requires is vital to ensuring it operate properly. You can check your vehicle handbook for this requirement or many commercial oil companies will be able to tell you by entering your registration plate online.

Once you have bought the correct oil for your car you need to remove the oil filler cap and pour the oil in, you may need a funnel to stop the oil spilling. If the oil does spill clean it up with kitchen roll or a rag to keep the engine bay clean. Pour the oil a little bit at a time, making sure to check the oil level regularly. With some cars it can take some time for the oil to settle in the system so you may need to come back later to check the levels again. It is a good idea to ensure that the car is parked on a flat to ensure the reading is not obscured.

Once you’ve topped up your oil your engine should be a bit quieter and run more efficiently. It makes sense to have the engine drained and change the oil every year or as a part of any servicing you get done on the car.

Make sure when buying any used car that you check the oil as soon as possible. Get used car finance on cars to help ease the cost of buying a car, car finance can help you afford a better and safer car.

 There’s a revolution going on in the car industry at the moment. Over the last decade, car manufacturers have been spending a lot of time and money investing in efficiency. The biggest area car manufacturers have looked at is the diesel engine.

Of course, more recently hybrid cars have been growing in popularity. The mix of a petrol engine and electric drive-train has proven a massive hit in the USA, but is it justified?

In this article, I’ll look at the top 10 fuel efficient cars avaliable to buy today. I’m not including electric cars because of how rare they are at present, although I’m hoping by this time in 2010 there will be a lot more on the roads.  

10. Fiat Panda 1.3 MultiJet 65.7mpg

See all 12 photos

Fiat Panda

A popular return of name for Fiat with the return of the Panda. This spacious little city car has amazed people with it’s sense of spaciousness. It’s a small car that feels big.

The small 1.3 Turbo diesel engine pumps out an impressive 65.7mpg on a combined cycle. There was some shock when this car first arrived at how well it was built. Fiat had a problem with bits breaking from almost new. Yet the Panda gets thumbs up from a lot of people and it help turn the tides for Fiats problems. 

9. Fiat 500 MultiJet 67.3mpg

Fiat 500

The new kid on the block. Retro is in and everyone is reviving classic cars. The Fiat 500 is obviously the new re-incarnation of the 500 from all those years ago. Using the same 1.3 TD engine from the Panda (above). Due to less weight (only 3 doors) and being a little more aerodynamic, the 500 manages an extra 1.6mpg over the Panda.

A great little car that’s a lot of fun to drive. Is a definate contender over the king of retro, the Mini.  

8. Renault Clio 1.5 dCi 67.30mpg

Renault Clio

Another face lift for the ever popular Renault Clio has appeared, and with it’s 80 horse power 1.5TD it has taken the crown of the most fuel efficient Renault of them all.The Clio is one of Renault’s best selling cars now, and they keep making it better.

Like the Fiat 500, it’s a lot of fun to drive, and like the Fiat Panda, it’s also very roomy with a decent size boot, and 5 comfortable seats. It’s looks are fresh up to date and as it’s a Renault, is built very well.

7. Citroen C2 1.4 HDi 68.90mpg

Citroen C2

The Citroen C2 has been around for a while now, so Citroen have just launched a face lift version of the car. It’s a good seller for Citroen, especially with the ridiculous cash back offers Citroen are known for! 68.9mpg comes from the 1.4HDi engine which is an absolute dream.

These well built French cars are on a par with Renault for quality and style. Both of these cars appeal to the youngsters as much as their elders and due to the massive increase in the economy are getting more and more popular.

6. Toyota Aygo 1.4 HDi 68.9mpg

Toyota

The Toyota Aygo is exactly the same as the Citroen C1. Both use the same 1.4 HDi engine producing a brilliant 68.9mpg. There both a lot of fun to drive while keeping them easy to use. Well built and very reliable will add to the low cost of ownership to make both these cars great sellers in 2009.

The one thing to know about these cars, is there’s a slightly cheaper brother to both of them. A 1.4 Petrol version is available for £1000 less, and still pulls 61.4mpg! Yes it costs a little more to run, but the little petrol engine is very capable.  

5. Mini Clubman Cooper D 68.9mpg

Mini Clubman Cooper D

This is one of the coolest cars out at the moment. Yeah it might have shocked you when you first saw one, but it’s growing on you! It’s not quiet as economical as the non Clubman version (losing 2.5mpg) but it’s worth it for the extra room the Clubman offers you. those extra doors and a real boot really help!

The Clubman is comfortable and spacious, and even though it’s growing in popularity, it’s not as common as the normal Mini. Get yourself something rare before everyone finds out about this great little car. 

4. Skoda Fabia Greenline 68.9mpg

Skoda Fabia

The Skoda Fabia is a great car. Skoda are part of VAG (Volkswagen Automotive Group) so in essence this car is the Volkswagen Polo Blue-Motion, but cheaper and slightly bigger! The slight increase in size means it’s heavier so loses out 5.4mpg over it’s VAG brothers. But the extra room and smaller cost means it’s still a winner.

This is the mark 2 of the Fabia, and is it not a pretty car? It’s a Volkswagen, so it’s well built and well run for ever.  

3. Mini Cooper D 72.4mpg

Mini Cooper D

For the majority of this millenium the Mini Cooper has been a massive success for BMW. It’s been one of the coolest cars to own. There small, cute and fun to drive. There maybe some controversy over the looks, and the fact it’s more Midi than Mini, yet the sight of one every 30 seconds in any major town or city speaks for itself.

The cooper D has been improved for 2009 and is now part of an very small group of cars to average over 70 mpg. Even with these current diesel prices, that’s a lot of mileage for your money! 

2. Volkswagen Polo Blue-Motion 74.3mpg

Volkswagen Polo

The Polo is another car that’s been around for years and is still very popular. Using the same engine and gear ratios as the Skoda and Seat, this daddy of the small VAG cars is a stunner. Amazing fuel economy, great build quality and VAG reliability make it a great car.

It runs joint top with the Seat (below) yet it sits in position 2 because of it’s cost. It might still be popular, but being over £1000 more expensive than the Seat means it’s not worthy of the number 1 spot. 

1. Seat Ibiza Ecomotive 74.3mpg

Seat Ibiza

Yes, the Seat Ibiza is the most economical car out today. using the same engine as the Polo and Fabia, this small little Spanish car is phenomenal value for money. It’s a little over £10000 although they can be had for about £8000 if you look and haggle) and with 74.3mpg it will keep the pounds in the bank.

As with all VAG cars, it’s well built, reliable and great fun to drive. The new version has just been launched, and Seat have really outdone themselves with the new model. There popping up everywhere. 2009 will see a great year for Seat judging by this amazing little car.  

Toyota Prius 65.70mpg

Honda Insight 64.20mpg

The Hybrids

And here are the 2 popular hybrids! Languishing near and off the bottom are the Toyota Prius and the new Honda Insight. They both use a 1.5 petrol/electric system to help the economy and it seems to work well, just not quiet as well as the modern diesel cars.

The Toyota Prius as you may have noticed has the same 65.7mpg as the Fiat Panda in the number 10 spot. The reason the Prius did not get the 10th spot is down to the initial cost. The Prius costs between £18 – 21,000, whereas the Fiat Panda costs a tiny £9000! That’s half the price! Sorry Toyota, you maybe one of the most popular cars in America, but in Britain your out done by the little Fiat.  

Conclusion

So they you have it, the top 10 economical cars available to buy today. There’s a great selection of cars available to run on less money, and as long as you drive correctly, these amazing little cars will reward you with simply amazing economy. I wonder if they’ll crack 100mpg over the next decade? Here’s hoping for 200mpg

More Car Engine Articles

is a Japanese multinational corporation company producing a range of automobiles with a variety of small combustion-powered car engines. These first Suzuki motor vehicles were powered by a then-innovative, liquid-cooled, four-stroke, four-cylinder engine. These new and used and reconditioned engines are available at global engines and gearboxes.

The G family engine

This engine is a type of internal combustion engine. The internal combustion engine is an engine in which the combustion, or rapid oxidation, of gas and air occurs in a confined space called a combustion chamber. This exothermic reaction of a fuel with an oxidizer creates gases of high temperature and pressure, which are permitted to expand. The defining feature of an internal combustion engine is that useful work is performed by the expanding hot gases acting directly to cause pressure, further causing movement of the piston inside the cylinder. For example by acting on pistons, rotors, or even by pressing on and moving the entire engine itself.

This contrasts with external combustion engines, such as steam engines and Stirling engines, which use an external combustion chamber to heat a separate working fluid, which then in turn does work, for example by moving a piston.
is almost always used to refer specifically to reciprocating engines, Wankel engines and similar designs in which combustion is intermittent. However, continuous combustion engines, such as jet engines, most rockets and many gas turbines are also internal combustion engines.
The G10 is an inline 3 cylinder engine utilizing aluminum alloy for the block, cylinder head and pistons. The G10 has 1.0 liter of displacement and is equipped with either a carburetor or electronic fuel injection and has an optional turbocharger. It has a single overhead camshaft driving six valves.
The G13 is an in line 4 cylinder engine utilizing aluminum alloy for the block, cylinder head and pistons. Displacing 1.3 L (1298 cc/79 in³), fuel delivery is either through a carburetor, a single point fuel injection or a multi-point fuel injection. The engine was produced as either an 8 valve with a single overhead camshaft (G13A) or as a 16 valve with double overhead camshafts (G13B).

is a line of 60° V6 automobile engines from Suzuki. Ranging in displacement from 2.0 L to 2.7 L, the H family was a modern all-aluminum engine with dual overhead cams, 24 valves, and multi-port fuel injection. It was co-developed with Mazda, which used a similar design in their 2.0 L KF V6. The H family was introduced in 1995 with the H20, but Suzuki and Mazda’s designs diverged greatly with the former increasing displacement and the latter experimenting with alternative induction technologies and smaller engine sizes.

:
was originally manufactured as a five-door hatchback, powered by a new generation of Suzuki 4-cylinder engines, the M family. This family featured DOHC, four valves per cylinder and variable valve timing. Displacement ranged from 1.3 to 1.5 L, and power going from 89 to 110 PS JIS (65 to 81 kW). Only the 1.3 L, detuned to 83 PS (61 kW) was available in export markets.

is a subcompact automobile. At its introduction in 1985, it was named the SA-310, but in 1986 it was renamed the Swift. Powered by a modest 993 cc straight-3 engine giving 50 hp (37 kW), 0 to 100 km/h was 14.9 seconds with a top speed of 145 km/h. The engine is very light, weighing only 63 kg.

is a compact car. It fits in between the compact and lower mid-size segments. The car was introduced in 2001 as a replacement for the Esteem / Baleno, with a tall 5-door hatchback (for maximum inner room efficiency) or 4-door sedan bodies. It featured two different 16-valve gasoline engines, with 1.5 L and 1.8 L, this one capable of 125 PS JIS (92 kW). In North America, the Aerio is considered a more sporty alternative, so it featured a bigger and more powerful 2.0 L engine, with 145 hp SAE (108 kW).

was a small SUV sold from 1996 through 1998. It was related to the Suzuki Sidekick, the X-90 was available with four wheel drive or rear wheel drive and used a 1.6 L I4 16-valve engine which produced 95 hp.

is a compact SUV, this model was equipped with two mid-mounted twin-turbo V6′s combined to deliver 985 hp.

More Car Engine Articles